PRODUCTS

Back to PRODUCTS

Watch the videos

2SP-2500H
The combination of a machine with powerful, high accuracy machining capacity and a high-speed loader delivers the highest throughput for mass-production applications.
Cycle time minimized with high-speed loading and powerful milling
Machine structure for high-speed loading and powerful machining
Workpiece load/unload time has been reduced to 4 seconds, and machining-to-part transport line takt time has been minimized. Moving component (headstock, turret) centers of gravity have also been positioned over sturdy slide guides.
Powerful, accurate machining has been achieved with the best machine structure possible for mass production.
  • Productivity improved with significantly stronger spindle
    The spindles are faster and more accurate with integral motor/spindle drives. The milling tool spindles also have higher output of 7.1 kW, increasing torque to 1.25 times that of the previous machine and doubling end millling capacity to 65 cm3/min. Process-intensive mill/turn operations have become possible.
  • The shortest line takt times with a high-speed loader
    During workpiece load/unload, the headstock moves to that position. The loader can enter the machine regardless of turret position.
    In addition, with servo-driven hand rotation and faster speeds of all movements, workpiece load/unload time of 4 seconds* has been achieved.
    * Does not include upper door open/close time.
    The load/unload time of 4 seconds is actual data; different operating conditions may require more time.
    Transportable weight 4kg × 2pcs 8kg × 2pcs
    Workpiece dimensions ø200 × L125 ø250 × L80

Long-run, stable machining with high accuracy

  • Split bed for high-quality machining
    A split construction is used for the bed. Transmission of vibration during cutting is inhibited by separating the right and left sides.
    This is also effective when high surface roughness is required.

Ideal for mass production of parts up to ø250 mm

  • The 2SP-2500H can take on loader-delivered workpieces up to ø250 mm in size, and achieves minimum takt times for mass-produced parts.
    With M specifications, the milling tool spindle capacity is strengthened, enabling a greater diversity of process-intensive machining.

    • Final gear
    • Cylinder

Highlighted Specs

Item Unit 2SP-2500H
Standard chuck size in 8
Max turning dia ømm (øin) 200 [410]* (7.87 [16.14])
Max work length mm (in) 120 [200]* (4.72 [7.87])
Spindle speed min-1 5,000
Turret L/R: V12
Motor kW (hp) 15/11 (20 min/cont) (20/15)
Machine size
(W × D × H)
mm (in) 2,200 × 2,734 (machine only) (86.61 × 107.64)
× 3,257 (max loader ht) (× 128.23)
Spec extension M
CNC OSP / FANUC

* Machine capacity without loader application

M: Milling

horizontal lathe machine