Bottle Blowing Machine
Bottle Blowing Machine
Bottle Blowing Machine produces plastic hallow containers of PET. It has the advantages of energy-saving, small size, low investment, (fast money back), efficient, and reasonable structure and is widely used in food, medicine, cosmetic, pesticide-killer, chemical and beverage packaging industries.
We supply our systems to water bottling businesses and water shops
R300,000.00 Excl. VAT
Option 1: One blowing machine with one heating oven
Production Capacity per Hour:
0.1-2.5L: 850pcs
3-5L: 600pcs
R350,000.00 EXCL. VAT
Option 2: Two blowing machine with one heating oven
Production Capacity per Hour:
0.1-2.5L: 1700pcs
3-5L: 1200pcs
Production Capacity per Hour:
0.1-2.5L: 1700pcs
3-5L: 1200pcs
BM-S4 SEMI 4CAVITIES BLOW MOLDING MACHINE
- Stretch Blow Moulding Machine is suitable to produce differently shaped bottles from PET tube. It is widely used to produce Mineral water carbonated drink, candy sauce, juice, medicine, cosmetic and oil bottle etc.
- The machine adopts revolving infrared pre-heater. It ensures extremely even heating for PET preforms.
- The machine uses mechanical-double-arm mould clamping which ensure the mould be closed tightly even in high pressure.
- The air system has been divided into two parts: Pneumatic action part and bottle blowing part.
- It can provide sufficient and steady high pressure for blowing irregularly shaped large bottles.
- The machine is also equipped with a silencer and an oiling pump to reduce noise and friction.
- The machine can be operated in the step-by-step mode and the semi-auto mode.
- The machine is small with low cost, easy and safe to operate. And it meets the need of beverage manufacturer, polyester bottle producer in city and countryside and is ideal bottle blowing equipment for water bottle
HP AIR COMPRESSOR
- Patent No.: 220347.2
Valve never Crack - Piston rings are made of chromium plated ring Life extended 3-4 times
- Suction diaphragm valve (gas and electricity mixing)
- Whole machine adopts rolling bearing
- Induction type low oil level protection.
- Heavy duty, long life, low noise main bearing.
- Integrated intake air noise reduction and air filtration system
Air-Compressor-Air Dryer ( Inside 2psc air filter) Machine | ||
| Flow capacity | Nm3/min | 1.0 |
| W.P | Mpa | 3.0 |
| Inlet Temp. | °C | ≤80 |
| Dew point | °C | 23 |
| Ambient Temp. | °C | ≤38 |
| Power Supply | V/Hz | 220/50 |
| Compressor power | Kw | 0.75 |
| Cold Medium | R22 | |
| Overall Dimension | mm | 950*600*1100 |
| Weight | Kg | 110 |
Air dryer is to remove the moisture from the compressed air and lower temperature of the compressed air in the heat exchanger.Air filter is to clear up the impurities out of the compressed air, like carbon-hydrogen, tiny dust and solid particles. | ||
Mold Air-Chiller (Optional Mold Water-Chiller) | |
| Compressor power (KW) | 2.5 |
| Refrigerant | R22 |
| Chilled water pump power(KW) | 0.75 |
| 10℃ Max. flow rate of chilled water(L/min) | 55 |
| Flow water inlet and outlet pipe | 1″ |
| Condensing water rate L/min | ≥36 |
| Exterior dimension | 850*560*870 mm |
| Water tank capacity | 38 |
| Weight | 180 |
The equipment can fast cooling the blow mold, greatly raise the working efficiency of blow moding machines and obviously improve the bottle quality. | |
Structure and Functions
Main machine: composed of machine body, closing structure, sealing stretching, and blowing machine, all together four parts.
- Closing structure is composed of fixed mould plate, moving mould plate, cylinder, and double bending arms and connecting poles. The air source is controlled by the helping of the connecting poles and double bending arms; the plates open and close thereby.
- The sealing stretching is controlled respectively by two left/right cylinders independently, conducting left and right stretching and sealing. It is also controlled by two solenoid valves of two position and five routes. They can adjust the air blowing retention time of the two cylinders respectively.
- The air source comes from the second level filter first, and then goes to two big size two-position-three-routes solenoid valves to blow high-pressure air to make bottles from perform .
- The operation screen is installed with microcomputer controller. It has LCD displaying function, manual or automatic functions switches. They control the time of opening and closing of mould, sealing stretching and blowing. Easy and convenient to operate.
Usage and Character
4Cavity semi blow molding machine is the new equipment which produces plastic hallow containers of PET. It has the advantages of energy-saving, small size, low investment, (fast money back), efficient, and reasonable structure and is widely used in food, medicine, cosmetic, pesticide-killer, chemical and beverage packaging industries.
Character:
- Equipped with microcomputer control, easy to operate.
- Heating part is IR heating tube, controlled by imported controlling silicon. The moving part is equipped with three phases motor, and drived by frequency changing part.
- TThere are left and right cylinders in sealing stretching part. the stretching length can be adjusted automatically, and the time for air blowing can be adjusted freely. the bottle blowing can benefit from doing so.
- The waste air can be exhausted from a silencer inside the machine. It reduces the possibility of creating water drop, and is prevented from making noise.
- There are two air storage barrels inside the main machine and one high, one low, pressure-reducing valve.
blowing mould
Blowing Mouth
Blow Shaping Unit
OVEN
HEATING MOUTH
Rotating Oven
Free Spare Parts List
Free Spare Parts List (Comes free with the machine) | |||
| Item | Commodity | Model | Qty |
| 1 | Seal rubber ring of cylinder | LQM80×45+40×360 | 4sets |
| 2 | Seal rubber ring of closed cylinder | SC100x170(FA) | 2sets |
| 3 | Seal rubber ring of electromagnetic valve | 4V310 | 10pcs |
| 4 | Seal rubber ring of 2 position 3-way | YCH23JD-15 | 4sets |
| 5 | Elbow | 1/2″ – 10″ | 2pcs |
| 6 | Elbow | 1/4″ – 10″ | 3pcs |
| 7 | Elbow | 1/4″ – 8″ | 4pcs |
| 8 | 3-way | 3/8″ – 8″ “Y” type | 3pcs |
| 9 | Straight | 1/4″ – 10″ | 2pcs |
| 10 | Elbow | 3/8″ – 10″ | 2pcs |
| 11 | Muffler | 1/2″ | 4pcs |
| 12 | Muffler | 3/8″ | 4pcs |
| 13 | Air inlet | 1/2″ | 1pcs |
| 14 | Fuse | RT14 | 1pcs |
| 15 | Seal Pad | ￠35×18 | 10pcs |
| 16 | Key | / | 2m |
| 17 | Tool only for mold locking | / | 5pcs |
| 18 | Trachea￠8×5 | ￠8×5 | 2m |
| 19 | Trachea￠10×6.5 | ￠10×6.5 | 2m |
| 20 | Silicon Controlled | / | 2pcs |
| 21 | Infrared Lamp | / | 5pcs |
| 22 | Temperature Controller | / | 1pcs |